Filters
Question type

Study Flashcards

The S5 is the interface used for the communication between the SGW and the PGW. Which of the following transport protocols is used by this interface?


A) GTP/TCP
B) GTP/UDP
C) GTP/IP
D) GTP/SCTP
E) None of the above answers are correct

F) B) and D)
G) B) and C)

Correct Answer

verifed

verified

During a UE detach procedure, which commands are exchanged over the S5 interface?


A) Delete Session Request / Delete Session Response
B) Terminate Session Request/Terminate Session Response
C) Release Session Request / Release Session Response
D) Delete Bearer Request/Delete Bearer Response

E) A) and B)
F) None of the above

Correct Answer

verifed

verified

Which of the following statements is FALSE regarding the Network Initiated Dedicated Bearer Activation procedure?


A) A Create Bearer Request message is sent from PGW to SGW.
B) An AA Request message is sent from AF to PCRF.
C) A Bearer Setup Request message is sent from SGW to MME.
D) A Re-Authorization Request message is sent from PCRF to PGW.

E) A) and C)
F) A) and B)

Correct Answer

verifed

verified

Which of the following parameters best describes the rate-limiting associated with a Non-GBR bearer?


A) The GBR and the MBR
B) The APN-AMBR
C) The MBR
D) The UE-AMBR
E) The APN-AMBR and the UE-AMBR

F) A) and E)
G) A) and B)

Correct Answer

verifed

verified

Which of the following statements is FALSE regarding the eNodeB?


A) The eNodeBs maybe interconnect TEID with each other via anX2 interface.
B) The eNodeB is an element of the EPC core.
C) The eNodeBs are connected to the EPC core via the S1 interface.
D) During an IMSI attach, the eNodeB selects an MME to service the UE.
E) The eNodeB performs the compression and encryption of the user data stream.

F) A) and D)
G) All of the above

Correct Answer

verifed

verified

Which of the following statements are TRUE regarding the SDF templates /filters? (Choose three)


A) An SDF filter can identify an SDF flow by matching the information in the IP 5-tuple and the Layer-7 application
B) One SDF template can have only one SDF filter for each direction.
C) One dedicated bearer can have more than one SDF template and multiple SDF filters.
D) One dedicated bearer can have only one SDF template.
E) One SDF template can have multiple SDF filters for each direction,
F) One dedicated bearer can have more than one SDF template.

G) A) and E)
H) B) and C)

Correct Answer

verifed

verified

Based on the information shown in the exhibit, when the SGW sends a downlink user data packet to the UE, which of the following is the source IP address expected in the IP packet? Based on the information shown in the exhibit, when the SGW sends a downlink user data packet to the UE, which of the following is the source IP address expected in the IP packet?   A)  10.10.2.1 B)  10.10.7.1 C)  20.20.0.1 D)  72.22.24.163 E)  None of the above answers are correct


A) 10.10.2.1
B) 10.10.7.1
C) 20.20.0.1
D) 72.22.24.163
E) None of the above answers are correct

F) C) and D)
G) A) and D)

Correct Answer

verifed

verified

Which of the following statements is FALSE regarding the MG-ISM module on an Alcatel-Lucent 7750 MG?


A) The MG-ISM module implements the PCC rules for the EPS bearers.
B) The MG-ISM module can be configured as a SGW/SGSN or a PGW/GGSN.
C) The MG-ISM module enforces the QoS rules for the EPS bearers.
D) On an Alcatel-Lucent 7750 MG, two MG-ISM modules can be configured as 1+1 redundant.
E) The switchover from the active MG-ISM card to the standby MG-ISM card has no impact on other EPC nodes

F) A) and D)
G) A) and C)

Correct Answer

verifed

verified

Based on the information shown in the exhibit, which of the following is TRUE when the PGW receives a "Create Session Request" with the "APN Restriction" set to "Private1"? Assume everything else is in working condition. Based on the information shown in the exhibit, which of the following is TRUE when the PGW receives a  Create Session Request  with the  APN Restriction  set to  Private1 ? Assume everything else is in working condition.   A)  The  Create Session Request  is rejected by the PGW and no bearer is created. B)  The  Create Session Request  is accepted by the PGW and the bearer is created successfully. C)  The APN cannot be configured with an  APN Restriction  value of  Private1 . D)  The  Create Session Request  cannot have an  APN Restriction  value of  Private1 . E)  None of the above answers are correct.


A) The "Create Session Request" is rejected by the PGW and no bearer is created.
B) The "Create Session Request" is accepted by the PGW and the bearer is created successfully.
C) The APN cannot be configured with an "APN Restriction" value of "Private1".
D) The "Create Session Request" cannot have an "APN Restriction" value of "Private1".
E) None of the above answers are correct.

F) All of the above
G) A) and B)

Correct Answer

verifed

verified

Which of the following statements is FALSE regarding the S1-based handover?


A) The SGW may be relocated.
B) The MME may be relocated.
C) Direct data forwarding via the X2 interface may be used.
D) Indirect data forwarding via the SGW may be used.
E) None of the above statements are false.

F) A) and B)
G) A) and C)

Correct Answer

verifed

verified

Based on the information shown in the exhibit, what type of handover is performed when the UE moves from eNodeB2 to eNodeB4? Based on the information shown in the exhibit, what type of handover is performed when the UE moves from eNodeB2 to eNodeB4?   A)  X2-based handover without SGW relocation B)  X2-based handover with SGW relocation C)  X2-based handover with MME relocation D)  S1-based handover with SGW relocation E)  S1-based handover with MME relocation


A) X2-based handover without SGW relocation
B) X2-based handover with SGW relocation
C) X2-based handover with MME relocation
D) S1-based handover with SGW relocation
E) S1-based handover with MME relocation

F) All of the above
G) C) and D)

Correct Answer

verifed

verified

Which of the following messages are exchanged between the PGW and the PCRF during the UE attachment procedure?


A) Authorization Control Request/ Authorization Control Answer
B) Credit Control Request / Credit Control Answer
C) Create Session Request/ Create Session Answer
D) Attach Request/Attach Answer

E) B) and D)
F) B) and C)

Correct Answer

verifed

verified

Which of the following statements is FALSE regarding the SGW handling of an incoming GTP packet with a TEID value of zero?


A) The ingress IOM card forwards the received packet to the active CPM card.
B) After processing the received packet, the MG-ISM card creates a response and sends it to the active CPM card
C) The CPM card forwards the packet to an active MG-ISM card.
D) The MG-ISM card creates the proper contexts and assigns the required TED values.
E) None of the above statements are false.

F) A) and D)
G) A) and B)

Correct Answer

verifed

verified

A UE is sending data to its FTP server over the EPC core with the TCP port 20. Based on the information shown in the exhibit, which of the following bearer(s) will be used for the uplink FTP flow? A UE is sending data to its FTP server over the EPC core with the TCP port 20. Based on the information shown in the exhibit, which of the following bearer(s)  will be used for the uplink FTP flow?   A)  The bearer # 5 will be used for the FTP flow. B)  The bearer #6 will be used for the FTP flow. C)  The bearer #7 will be used for the FTP flow. D)  Both bearer # 5 and bearer # 6 will be used for the FTP flow. E)  Both bearer #5 and bearer #7 will be used for the FTP flow.


A) The bearer # 5 will be used for the FTP flow.
B) The bearer #6 will be used for the FTP flow.
C) The bearer #7 will be used for the FTP flow.
D) Both bearer # 5 and bearer # 6 will be used for the FTP flow.
E) Both bearer #5 and bearer #7 will be used for the FTP flow.

F) A) and B)
G) All of the above

Correct Answer

verifed

verified

Which of the following statements is FALSE regarding the S1-MME interface?


A) It is the control plane interface between the E-UTRAN and the MME.
B) It is used to signal the TEIDs for the S1 bearers between the eNodeB and the SGW.
C) The eNodeB receives the Paging messages over the S1-MME interface.
D) It is used for the management of the Radio Access Bearers.
E) It is based on the IP/UDP protocols.

F) A) and D)
G) A) and C)

Correct Answer

verifed

verified

On Alcatel-Lucent 7750 SGW, which of the following statements is FALSE regarding the debugging of a given IMSI?


A) The debugging allows the operator to analyze information and messages related to a given IMSI in real-time.
B) The APN value must be specified in the debug command.
C) The output may be filtered per APN or per reference point.
D) The debugging supports three levels of tracing detail.
E) None of the above statements are false.

F) A) and D)
G) A) and E)

Correct Answer

verifed

verified

During a service request procedure, which message is sent by the MME over the S11 interface to provide the SGW with the eNodeB address and eNodeB S1-U TEID?


A) Downlink Data Notification
B) Downlink Data Notification Ack
C) Modify Bearer Request
D) Modify Bearer Response

E) None of the above
F) A) and B)

Correct Answer

verifed

verified

Based on the information shown in the exhibit, how many mobile subscribers is the PGW currently serving? Based on the information shown in the exhibit, how many mobile subscribers is the PGW currently serving?   A)  1 B)  2 C)  3 D)  5 E)  6 F)  Unable to determine based on the provided information.


A) 1
B) 2
C) 3
D) 5
E) 6
F) Unable to determine based on the provided information.

G) D) and F)
H) B) and E)

Correct Answer

verifed

verified

Which of the following statements is FALSE regarding the communication between a UE and an eNodeB?


A) The eNodeB terminates the air interface of the UE and manages the radio connection between the UE and the eNodeB.
B) The eNodeB transmits the paging messages to an idle UE when the paging is required.
C) During an IMSI attach, the UE informs the eNodeB which MME should be used to service it.
D) The eNodeB performs the compression and encryption of the user data stream.
E) A UE must go through an eNodeB to access the EPC core.

F) C) and E)
G) B) and C)

Correct Answer

verifed

verified

When a UE is roaming, which of the following interfaces is used when the visiting SGW needs to communicate with the UE's home PGW?


A) TheS1 interface.
B) The S5 interface.
C) The S8 interface.
D) The S10 interface.
E) The SGi interface.

F) All of the above
G) C) and E)

Correct Answer

verifed

verified

Showing 81 - 100 of 116

Related Exams

Show Answer